2012年9月首次通過中國合格評定國家認可委員會CNAS L5854實驗室認可。In September 2012, it was approved for the first time by the CNAS L5854 Laboratory of the China National Accreditation Committee for conformity assessment. 2014年4月通過上汽集團供應商實驗室能力評定認可,證書編號:SC Lab-RP-12006。In April 2014, it was approved by SAIC’s supplier laboratory capability, certificate number: SC Lab-RP-12006; 2016年6月通過一汽大眾質量能力(Formel Q)評審,被評為A級供應商,證書編號:VA-F-16274。In June 2016, FAW Volkswagen’s quality capability (Formel Q) was evaluated, and it was rated as a level supplier with the certificate number: VA-F-16274. |
![]() | ||
![]() |
4.2 膠料測試Rubber test Performance Items: Damping 阻尼 Creep 蠕變 Strain / Strength 強度/伸長率 Ageing /low temperature 耐老化/低溫 Anti-oil 耐油性 Ozone resistance 耐臭氧 Viscosity & Mooney 粘度/門尼 Vulcanisation characteristic 硫變特性 Carbon Disperse 碳黑分散度 Tension And compress Test 拉壓測試 Chemical Composition Analysis 化學成分分析 Metallographic Analysis 金相分析 Corrosion Resistance Test 耐腐蝕測試 Hardness test 硬度測試 | ||
4.2 靜態測試Static test![]() | |||
拉伸試驗機 Tensile test machine 最大拉力Maximum tension :50000N; 測試項目Test items : 扯斷強度breaking strength ; 定負荷伸長率Elongation at specified load ; 線繩粘合強度Cord adhesive strength ; 布粘合強度Fabric adhesive strength ; |
熱空氣老化試驗箱 Hot air aging test box 最高溫度maximum temperature : 300℃; 測試項目Test items : 耐高溫熱空氣老化High temperature and hot air aging test. |
耐臭氧試驗機 Ozone resistant tester 測試條件Test condition: 50ppm X 40℃; 測試項目Test items : Ozone aging test; |
高低溫循環試驗機 High and low temperature cycle test machine 測試條件Test condition: 高溫High temperature:121 ℃, 低溫Low temperature:-40 ℃ Test items : 高低溫循環試驗Temperature cycling test; |
4.2 動態測試Dynamic testing ![]() |